venerdì 11 aprile 2014

My Blood Bowl Custom Pitch: "Waaagh! Springs Stadium" - part 3


Once sand and glue were properly dried, I proceeded with painting a brown base over all the surface













 Sever halds were needed to get an uniform colour all over the field, due to the different basing materials (i.e.: polystirene, sand and sand+toilet paper).

Next steps: highligts with whiter tones of brown.


Then I tried out how some synthetic grass would look on the field, with a chessboard pattern,
but without glueing it yet.



 I started painting the white stripes of the pitch and the dugouts, while waiting for the polystirene blocks to glue under the... weight of culture!






And also trying out how a central mark would wOrk out better.






 What's a football pitch without ads?
After some internet browsing, I found many good ones!
Yeah! The field itself is done!!


Then I proceeded with the grass squares. I started with groups of five per time...

...proceeding with packs of 12-15 squares per time.






 That last dirty dozen of squares!






And finally! Green squares over.


Time to make the small water pond.
I used some DAS paste, shaping and placing it in order to look like a river's bed.
I also added some real rocks to better achieve the result.









 



Still byased on the central symbol: straight or slightly crooked? 




And this is the result so far:
 
 My unpainted teams call for painting asap! :P




This is how the pitch looks closed and deployed.


Things I need to complete:
-central Waaagh! symbol;
-turn and reroll counters. Their place is at the side of the dugouts;
-little water pond. It's stll drying and I'll paint it greyish with water effect.

giovedì 10 aprile 2014

My Blood Bowl Custom Pitch: "Waaagh! Springs Stadium" - part 2

I carefully made sure that Polystirene sheets were cut in order to suit the hringes' placement.
 


I originally prepared the field itself, with a central strip that can be removed before closing the suitcase.

 





 Blocks resulted 3cm wide, not the "official" 27mm.
I just used a pencil to carve the polystirene.




 




I completed the blocks for the entire gaming area.







 
 


 And there we go!










 To the main pitch, I added a dugout each side and a turn/reroll counter.










And since it's a desert-like scenario, I cut some rocky pillars out of polystirene.








At the other side of the rocky pillars, I made a couple of hills with what will be a pond/ river/ lake inbetween.


Always using a pencil, I carved the "scatter D8" and the dugouts.






 Once all the gaming zones were completed, I poured vinyl glue all over the squares, sprinkling thin sand over the blocks.


In order to obtain a more "desert-like" look, I used toilet paper with watered-down vinylic glue, before covering the whole area with sand.



I then shook off the sand from the blocks, once dried.








And in the next update:
painting time!










My Blood Bowl Custom Pitch: "Waaagh! Springs Stadium" - part 1

Following my newest miniature addiction - Blood Bowl -, I embarked on a crazy project: building my own, portable pitch.

After a couple of weeks of lax planning, I came up with the idea of a semi-wasteland scenario for the Orc team I'm assembling.
A Dark Elf stadium would have been cool also, with spikes, sharp bits and gothic structures.
But it would have taken too much time, a lot of skill and effort and, mostly, would have been too much emo for my tastes! :P

I wanted to make it portable, so it could be stored or transported with ease.

So after a couple of sketches I raided my local DIY shop and bought a few wood panels (2*60x60x0.8mm; 6*60x5x0.8mm; 1*60x10x0.8mm), screws, iron angles, hinges, polystirene sheets and some acrylic paint.





I then started assembling the panels (and to be honest with no idea or blueprint, just the rough sketch I drew on a block notes).




Hooray! It somehow worked!



I then proceeded with the side bars, to make the panels look more like a suitcase.




Hey, you can make a mouse track, with the same materials! :D
After the sides of the box were done, I started cutting the polystirene sheets to suit my needs.


More to follow. ;)

venerdì 4 aprile 2014

Grey 'uns go faster 2.

Some minor updates on my Orc team.

I completed the 4 lineorcs.



And added some facial protection to the blitzers' helmets.


Then I obtained an helmet for the Troll.





Final shots of the helmet worn!